Monoprice MP Select Mini 3D Printer

Monoprice MP Select Mini 3D Printer allows you to print any object in a wide array of print materials. It makes 3D printing affordable and easy.


back to menu ↑

Key Features and Specifications

The printer has a build area of 120 x 120 x 120 mm. The highest possible print resolution is at 100 microns with a printing speed of 55 mm per second.

File designs can be connected to the machine through a microSD card slot or a USB slot. The manual that comes with it suggests using Cura, Repetier-Host, ReplicatorG, and Simplify3D as applications to create and prepare the objects. This means that MP Select Mini isn’t just limited to propriety software.

Furthermore, it’s also quite open to any kind of filament as long as it is a standard 1/75 mm spool of PLA or ABS thermoplastic.

The above-mentioned specs of software and filament is an advantage of the Select Mini as most 3D printers are just confined to closed software and filament.

back to menu ↑

What’s In The Box?

The package of Monoprice MP Select Mini includes an AC power adapter, a hex key for bed platform leveling, a plastic spatula for scraping prints off the bed, a 256MB microSD card, and a micro USB cable. It also includes a piece of paper with the website where you can get the full manual. There is also a spool holder that can be clipped to the side. It doesn’t come with a free filament so make sure you have some ready to use.

Setting up is quite easy. It would only take about 20 minutes before you can start printing. There might be a few hiccups. One is its calibration. For some reason, the factory did not calibrate the unit ahead. So, you have to do it yourself using the hex key provided so you can adjust the settings. It would take some time to get it right.

Also Read -Print Case for Apple

back to menu ↑

Build Quality and Design

In terms of design, the Monoprice MP Select Mini is impressive. It is sturdy and the sheet metal provides a nice protection to the important electronics inside. It’s basically like a tank but more compact so you don’t worry about damaging it while transporting it.The MP Select Mini is a Cartesian-style fused filament fabrication printer with a one-sided arm on the print head. It only contains a single fan to cool the nozzle so your choices of filaments may be a little limited.

At the top, there is a “quick-release” extruder with a steel gear. This feeds the filament to the hot-end using a Bowden cable set up. This is another reason to limit your filament options.

back to menu ↑


There are a few things that Monoprice MP select Mini lets you do that aren’t included in their manual. While there are no upgrade options, there can be little hacks you can do to improve the performance of this printer.

You can add an adaptor for an E3D V6 hot-end, which is considered the industry’s standard in desktop 3D printing. Also, there are hacks to control the temperature of the printer by tuning the proportiona-integral-derivative (PID) controller so its behavior becomes more stable.

Perhaps the most promising hack is activating its wireless connectivity. You can download the original Malyan M200 firmware and install it. This part here needs extreme caution as it may cause voiding your warranty and, at worst, bricking your machine.

back to menu ↑

Tell it what to print!

  • Find a thing you want to print on thingiverse and download it.
  • Open cura and then load the file you just downloaded
  • Take a micro sd card, insert it into your computer and save the gcode file that cura created.
  • Eject the micro sd card and take it to your printer.
  • Insert the micro sd card in the micro sd slot on the side of the printer.
  • Turn the printer on.
  • Scroll to the part that says print and click on it.
  • Find the file you loaded on the sd card and click on it.
  • The printer will print when its ready to. You may have to preheat the nozzle and the bed.

back to menu ↑



Monoprice Select Mini Gets Smooth

Monoprice Select Mini Gets Smooth

May 10, 2017 - Hackaday

We've had a love affair with the Monoprice Select Mini since it came out. The cheap printer has its flaws, though. One of them is that the controller is a bit opaque. On the one hand, it is impressive that it is a 32-bit board with an LCD. On the other...

back to menu ↑



back to menu ↑



back to menu ↑


MP Select Mini is the best 3D printer you can get that’s around the $200 price range. After some testing and review, the MP Select Mini was found to be a flexible desktop 3D printer that is perfect for personal and seldom use.

If you’re looking for a desktop 3D printer that will suffice your small business needs, you might want to opt for the more expensive but more quality desktop 3D printers out there.

The Monoprice MP Select Mini isn’t perfect but for the price of $220 (in Amazon as of current writing), this printer gives you the service that is worth your money. It’s ease of use and versatility when it comes to software and filament are just some of the major advantages you can get.

Conclusively, the Monoprice MP select mini is best for beginners and students to learn more about the fundamentals of 3D modeling and printing.

back to menu ↑

Price alert and history

Set a price alert

  1. Received this printer in early December (2017) and it is EASY to set up and get started. The bed needed to be leveled, then it was off to the races. The print quality is great, especially considering the price. I have printed with pla and abs, though if I were to print with abs in the future I would try enclosing the print area. I wasn’t sure from the description when I purchased this but it is V2.

  2. I picked this up when it was on sale for $209. Its been going non stop since I got it. This is a V2 with with a black mat installed on the bed that looks like Build Tak. I would recommend this to anyone that wants to try out 3D printing at a very low price point.I wasn’t expecting such good output from something so cheaply priced. The build of the unit is solid as well.

  3. so far the bed has stopped working it reads 500 degrees and stops heating …… and I’ve only printed around 10 things… also 5 times out of 10 when starting a print it will go right past middle point and lock up in the corner….. I’ve had to pull power from it 5 times cause it was killing its stepper motors…

  4. Amazing printer but boy do I wish there was an easier way to ensure the print bed was level.

  5. Reply
    random name is not mine September 28, 2017 at 12:00 am

    I bought this having done a fair bit of research thinking it was a decent price and I could return it if it was rubbish, as a lot of people seem to have a hard time getting cheap 3d printers to work. Well, I got it all setup quite easily and printed from the card. Amazing, worked first time. Then I went to thingiverse and downloaded a .stl to slice in cura using settings from a guy on youtube. Amazing. Nearly everything I printed has worked really well. 3 days in and I have mine hooked up to a raspberry pi running octoprint so I can simply upload gcode files from my laptop and voila – instant thing made out of plastic. I did print out a new spool holder as the one it came with it too short for the primavera value spool Im using, and I’m making a few mods – (look on youtube) but I haven’t had such a great new toy in absolutely ages.Basically this is a copy of the prusia i3, and as such here is a huge community with help, suggestions, and mods. Although it word brilliantly out of the box, with a few mods this behaves likes an extremely expensive 3d printer. But its good enough as it comes! If you are remotely interested in trying this I recommend this printer. Its the v2 so it has thumbwheels, by the way, you don’t need to add them..

Leave a reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Go4amz | Gadget Reviews | Oral B Pro 1000 | Instax Mini 8 |